E-bike compatibility
The ROX and EOX series is e-bike ready and can be easily connected to many partner e-bike systems. When your device is connected, the bike-specific values will be displayed.
Check whether your e-bike is compatible with your SIGMA.
Every e-system has requirements that must be considered to ensure compatibility with SIGMA components. You can tell which system your e-bike is equipped with from the brand name on the motor, the handlebar control unit or in the technical information of your e-bike.
CHOOSE YOUR E-SYSTEM and check compatibility.
Ride 50 System: To ensure compatibility, the operating unit (Remote b, Remote fX, Remote bX, Remote rX) must have at least firmware 2.1.
Ride 60 System: Your ROX or EOX bike computer is compatible with the Ride 60 E-System. (BLE and ANT+ LEV capable)
SIGMA COMPATIBLE E-BIKE PRODUCTS
ROX 2.0
ROX 4.0
ROX 4.0 ENDURANCE
ROX 11.1 EVO
ROX 12.1 EVO
EOX VIEW 1300
Device display
Your bike computer can only display the values provided by your e-system.
| 1. Basic information | BLE | ANT+ LEV |
|---|---|---|
| Speed |  * | * |
| Cadence | * | x |
| E-bike battery | * | * |
| Estimated range | * | * |
| Pedaling power | * | x |
| Odometer | * | * |
| Total ride time | x | x |
| 2. Assist mode | BLE | ANT+ LEV |
|---|---|---|
| Current assist mode | * | * |
| Assist mode names | * | x |
| Show start-up assistance | x | x |
| 3. Gear information | BLE | ANT+ LEV |
|---|---|---|
| Current gear | x | x |
| Number of gears | x | x |
| Shifting advice | x | x |
| 4. Light status | BLE | ANT+ LEV |
|---|---|---|
| Off, Low Beam (ON) | * | * |
| High Beam (BEAM) | x | * |
| 5. E-System information | BLE | ANT+ LEV |
|---|---|---|
| Bike name (device name) | | |
| Serial number | | |
| Protocol version | * | x |
| Error notification | x | * |
| Service information | x | x |
*Available if E-System connected.
Establish connection
Make sure that the e-system is switched on and the wireless interface is ready to transmit while the SIGMA WL e-bike computer searches for compatible e-systems.
Shimano: The STEPS system can be found via Bluetooth for 30 seconds after switching on or pressing a button of the STEPS system. To ensure that SIGMA WL e-bike computer can find the STEPS system, it is recommended to press the STEPS system button while searching SIGMA WL e-bike computer for compatible e-systems.